Skip to main content

Fly Ash Bricks Manufacturing, Advantages & Disadvantages | Supertech Creations

 


Fly Ash Bricks are made up of ash, lime, gypsum, and sand. These are often used extensively altogether building construction activities almost like common burnt clay bricks. Ash bricks are comparatively lighter in weight and stronger than normal clay brick, and eliminate the necessity for plaster; it can reduce high construction costs and erosion.

Manufacturing Process:

Fly ash (70%) Lime (10%) Gypsum (5%) and sand (15%) are manually feed into a pan mixer where water is added to the required proportion for homogeneous mixing. The proportion of raw material may vary depending upon quality of raw materials. After mixing, the mixture are allowed to belt conveyor through feed in to automatic brick making machine were the bricks are pressed automatically. Than the bricks are placed on wooden pallets and kept as it is for two days thereafter transported to open area where they are water cured for 10 -15 days. The bricks are sorted and tested before dispatch.

Advantages of Fly Ash Bricks:

  • Due to the lighter bricks, this stress and strain are decreases manifold.
  • Fly ash bricks absorb less heat and that they are better than clay bricks, for Indian climate
  • Due to the high strength, there's practically no breakdown during transport and use.
  • The leakage of water through bricks is reduced thanks to less water penetration.
  • They absorb less water and save costs.
  • Fly ash bricks are stronger, more uniform, and denser than clay bricks.

Disadvantages of Fly Ash Bricks:

  • Poor quality often features a negative impact on concrete; it can increase permeability, thus damaging the building.
  • The strength of mechanical bonding is weak but is often corrected using marble waste.
  • There are going to be more wear and tear within the range of size.
  • Fly Ash Bricks aren't suitable within the winter area region.
  • These bricks are only available in modular size. Larger size bricks aren't produced thanks to cracks.
  • Material aren't easily available

 “Supertech Creations”, is a well-known Fly Ash Bricks manufacturer and supplier which are made up of the best quality. “Supertech Creations.” have made several impressive growth & success records within the market thanks to their commendable product-line, sound facilities, and hard efforts of execs.

 If you would like to settle on good material concrete pavers then contact our professionals by visit our website here: www.flyashbricksindore.com

Labels:
Location: Pragati Vihar, Indore, Madhya Pradesh 452016, India

Comments

Post a Comment

Popular posts from this blog

Fly Ash Bricks vs AAC Blocks – Features, Preparation, and differences

  Fly Ash Bricks Fly Ash Bricks are an artifact, specifically masonry units, containing class C or class F ash and water. Compressed at 28 MPa and cured for twenty-four hours during a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for quite 100 freeze-thaw cycles. In other words, ash bricks are masonry units that are utilized in the development of buildings. AAC Blocks Autoclaved Aerated Concrete may be a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced during a wide selection of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are 3 times lighter. Preparation Preparation of Ash Bricks The mixing ratio is usually 40–50% ash, 50–40% sand 10% lime and 4% water. Ash reacts with lime within the presence of moisture to make calcium silicate hydrate which is that the binder material. The raw mixture goes into the molding press / machine; the bricks a...
Post a Comment
Read more

Which One is Better - For Building or Home, Fly Ash Blocks or Red Bricks?

About Supertech Creations  Established in 2013, Supertech Creations has made a name for itself in the list of top suppliers of Fly ash Bricks Indore . The supplier in Indore, Madhya Pradesh and is one of the leading sellers of listed products. Which one is a better - fly ash block or red bricks? Fly Ash Bricks or AAC Blocks are being used increasingly as a replacement of traditional Red Bricks. AAC Block is made from Fly Ash which is a residue of Thermal Power Plant. Introduction of Fly Ash bricks Fly ash bricks are as the name suggests are manufactured by using fly ash which is a by-product of the thermal power plant. The problem of fly ash disposal can be easily solved by manufacturing such products. In other words, Fly ash bricks are masonry units that are used in the construction of buildings. They are considered to be a part of good and affordable building materials. They contain Class C fly ash and water. They are also called fly ash lime bri...
Post a Comment
Read more