Skip to main content

Fly Ash Bricks vs AAC Blocks – Features, Preparation, and differences

 




Fly Ash Bricks

Fly Ash Bricks are an artifact, specifically masonry units, containing class C or class F ash and water. Compressed at 28 MPa and cured for twenty-four hours during a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for quite 100 freeze-thaw cycles. In other words, ash bricks are masonry units that are utilized in the development of buildings.

AAC Blocks

Autoclaved Aerated Concrete may be a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced during a wide selection of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are 3 times lighter.

Preparation

Preparation of Ash Bricks

The mixing ratio is usually 40–50% ash, 50–40% sand 10% lime and 4% water. Ash reacts with lime within the presence of moisture to make calcium silicate hydrate which is that the binder material. The raw mixture goes into the molding press / machine; the bricks are pressed struggling. This is often how ash bricks are prepared.

Preparation of AAC Blocks

AAC Blocks are made up of the mixture of cement, lime, gypsum and an aeration agent. Sometimes a touch amount of ash is additionally added within the mixture.

Features

Features of ash Bricks:

  • The standard size of the brick is 230x110x70
  • The bricks are manufactured and tested as per IS 12894-2002
  • Fly ash bricks are sound, compact and uniform in shape, size and color. Smooth rectangular faces of the bricks are accompanied with sharp and square corners.

Features of AAC Blocks:

AAC Blocks is taken into account to be a superb and unique sort of artifact due to their sound, fire, and warmth resistant features.

As the AAC blocks reduce overheads at the development site and at an equivalent time increase the standard of the building, it's always preferred over the red bricks.

Because of its excellent properties and features, AAC is widely utilized in different building constructions.

Difference between Fly Ash Bricks and AAC Blocks

Fly Ash BricksAAC Blocks
These Bricks are made from cement, slag, fly ash.          AAC blocks are manufactured from the mixture of fly ash, cement, lime, gypsum and an aeration agent.
Fly ash brick has more uniform shape as they are cast in machine mouldAAC Block is relatively uniform in size and does not contain coarse aggregate phase.
Fly ash brick has Cement grey colorDry density of AAC block varies from 451 kg/m3 to 1000 kg/m3.
Fly Ash Bricks has compressive strength – 75 to 100 kg/cm²AAC Block can be used to build both internal and external walls.

Supertech Creation is a well-known Fly Ash Bricks Suppliers and wholesaler which are made up of finest quality. He has made several impressive growth & success records within the market thanks to their commendable product-line, sound facilities and hard efforts of execs.

If you would like to shop for Fly Ash Bricks, or want to know more about our products, you can visit our website- www.flyashbritindore.com

Labels:
Location: Pragati Vihar, Indore, Madhya Pradesh 452016, India

Comments

Post a Comment

Popular posts from this blog

Best Quality Reflective Paver Block Manufacturer & Supplier in Indore

  Reflective Pavers Blocks: Reflective Pavers Block are usually made from cement or concrete, and simulate the effects of cobblestone paths. Interlocking paver’s blocks join together through the use of sand and can cover any courtyard, decking, driveway, or walkway. Paver block, also known as a square paving block, is a commonly used decorative method. There are many different patterns of paver blocks that can be obtained using block paving. It is the strongest of the block paving bonds, making it a good choice for drive and road surfacing. The Primery Machines required for the Manufacturing Process of the Reflective Paver Blocks are: Two Vibrating Tables One Pan Concrete Mixture Machine One Pan Type Mixture Machine (Top mix) Air Compressor (for spray coating) 300kg Electronic Weight Scale Basic Material for Handling Equipments PVC Rubber Paver Block Moulds or Plastic Paver Block Moulds, it depends upon the Buyer Raw Materials Required for the Making of Reflective Paver Blocks Ag...
Post a Comment
Read more

Reflective Paver Blocks Manufacturer & Supplier - Supertech Creations

Reflective Pavers Introduction Reflective pavers are most commonly made from cement or concrete, and tend to simulate the effects of cobblestone pathways. Interlocking pavers blocks  connect together through the use of sand, and can cover any patio, decking, driveway or walkway. Paver Block also known as Square paving Block is a commonly used decorative method of creating. There are many different laying patterns that can be achieved using block paving. It is the strongest of the block paving bonds as it making a good choice for driveways and road surfacing. Reflective Pavers Blocks It is one of the most popular flexible pavement surfacing options. Paver blocks are used for exterior pavement applications. They are available in various  sizes ,  shapes ,  colors , and  patterns. Advantages of Reflective pavers blocks : - Low Maintenance :- ·   Pavers require low maintenance as compared to the plain concrete or asphalt ...
Post a Comment
Read more