Skip to main content

Fly Ash Bricks Vs AAC Bricks by Supertech Creations









About Supertech Creations 

Established in 2013, Supertech Creations has made a name for itself in the list of top suppliers of Fly ash Bricks Indore. The supplier in Indore, Madhya Pradesh and is one of the leading sellers of listed products.

Fly Ash Bricks Vs AAC Bricks

Fly Ash Bricks or AAC Blocks are being used increasingly as a replacement of traditional Red Bricks. AAC Block is made from Fly Ash which is a residue of Thermal Power Plant.

First of all, short descriptions about Fly Ash bricks and AAC bricks.

Introduction of Fly Ash bricks

Fly ash bricks are a building material, specifically masonry units, containing class C or class F fly ash and water. Compressed at 28 MPa and cured for 24 hours in a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for more than 100 freeze-thaw cycles. In other words, Fly ash bricks are masonry units that are used in the construction of buildings. They are considered to be a part of good and affordable building materials. They contain Class C fly ash and water. They are also called fly ash lime bricks
Introduction of Autoclaved Aerated Concrete Blocks

AAC Block known as Autoclaved Aerated Concrete Block is a building material which is used for both exterior and interior construction purpose. AAC Blocks features in lightweight suitable for easy construction work. They are also called as lightweight bricks. Due to the lightweight, they minimize the dead weight of the particular structure. Today AAC Blocks have become popular in the field of construction all over the world for their unique features.

While comparing AAC blocks vs fly ash bricks, there arises confusion in selection of masonry units for constructing a house. Here we have given comparison between AAC blocks, fly ash bricks, to help you make the right choice.

1. General

·      AAC Blocks are lightweight building blocks cut into masonry blocks or formed larger planks and panels.
·     Fly ash bricks are environment friendly bricks which are made using fly ash. They are also called pulverized fuel ash – lime bricks.

2. Raw Material

·     AAC blocks are made from the mixture of cement, lime, gypsum and an aeration agent. Sometimes a little amount of fly ash is also added in the mixture.

·        Fly ash bricks are made from the mixture of fly ash, cement, sand, lime, and gypsum.

3. Uses

·    AAC Blocks can be used to build internal and external walls of a framed structure. AAC blocks are also used in load bearing structures.

·  Fly ash bricks are strong and durable bricks which are used as an alternative to clay bricks. They can be used in masonry construction as well as for other uses in which red bricks are used.

4. Water Absorption

·        Water Absorption of AAC block should not be 10% its weight.

·        Water absorption of fly ash bricks should not be more than 15 – 20% of its weight.

5. Cost

·    Individual block is expensive, but the overall cost of masonry is low, as it consumes less mortar. Also for same dimensions of the walls, less number of AAC blocks is required as compared to red bricks. It also gives more carpet area or vice versa for same carpet area, it reduces built up area. It saves cost of steel also.

·       Fly ash bricks cost are the cheapest masonry units. Overall cost is more as they require more mortar.

5. Environmental Impact

·        During the manufacturing process, waste of the AAC block is recycled and used again. This waste is made from the cutting process.

·      Fly ash bricks utilize fly ash waste which is generated from thermal power plants. Thus it helps and solves disposal problem. Conservation of top soil is done as they do not use clay.

“Supertech Creations”, is a well known fly ash bricks Manufacturer and supplier in Indore which are made from finest quality. “Supertech Creations.” have made several impressive growth & success records in the market due to their commendable product-line, sound facilities and hard efforts of professionals.

If you want to choose good material fly ash bricks then contact to our professionals by visit our website here: http://flyashbricksindore.com/

Labels:
Location: Bicholi Mardana, Indore, Madhya Pradesh 452016, India

Comments

Post a Comment

Popular posts from this blog

Fly Ash Bricks vs AAC Blocks – Features, Preparation, and differences

  Fly Ash Bricks Fly Ash Bricks are an artifact, specifically masonry units, containing class C or class F ash and water. Compressed at 28 MPa and cured for twenty-four hours during a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for quite 100 freeze-thaw cycles. In other words, ash bricks are masonry units that are utilized in the development of buildings. AAC Blocks Autoclaved Aerated Concrete may be a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced during a wide selection of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are 3 times lighter. Preparation Preparation of Ash Bricks The mixing ratio is usually 40–50% ash, 50–40% sand 10% lime and 4% water. Ash reacts with lime within the presence of moisture to make calcium silicate hydrate which is that the binder material. The raw mixture goes into the molding press / machine; the bricks a...
Post a Comment
Read more

Fly Ash Bricks Manufacturing, Advantages & Disadvantages | Supertech Creations

  Fly Ash Bricks are made up of ash, lime, gypsum, and sand. These are often used extensively altogether building construction activities almost like common burnt clay bricks. Ash bricks are comparatively lighter in weight and stronger than normal clay brick, and eliminate the necessity for plaster; it can reduce high construction costs and erosion. Manufacturing Process: Fly ash (70%) Lime (10%) Gypsum (5%) and sand (15%) are manually feed into a pan mixer where water is added to the required proportion for homogeneous mixing. The proportion of raw material may vary depending upon quality of raw materials. After mixing, the mixture are allowed to belt conveyor through feed in to automatic brick making machine were the bricks are pressed automatically. Than the bricks are placed on wooden pallets and kept as it is for two days thereafter transported to open area where they are water cured for 10 -15 days. The bricks are sorted and tested before dispatch. Advantages...
Post a Comment
Read more

Best Blocks & Bricks Manufacturer in India – Supertech Creation

  Bricks & Blocks Bricks are small Rectangular Blocks which will be created to form parts of buildings, typically walls. The utilization of bricks dates back to before 7,000 BC when the earliest bricks were formed from hand-molded mud and dried within the sun. During the economic Revolution, mass-produced bricks became a standard alternative to stone, which might be costlier, less predictable and harder to handle. Block or Paving Blocks is one among the favored flexible surface treatment options for outdoor pavement applications. These blocks are looks beautiful, the block are often utilized in any season. Advantages of Bricks and blocks Strong Fire resistant Insect proof material Low maintenance Reliable Lightweight Water-resistant Frost resistant Combines thermal and acoustic properties Are Bricks and Blocks fireproof? Blocks have a build-in property of resistance to fireside, so it doesn't require any additional fire protection to fireside where...
Post a Comment
Read more