Skip to main content

Know About Fly Ash Bricks by Supertech Creations

 


Established in 2013, Supertech Creations has made a name for itself in the list of top suppliers of Fly ash Bricks Indore. The supplier in Indore, Madhya Pradesh and is one of the leading sellers of listed products.

Introduction of Fly Ash bricks

Fly ash bricks are manufactured from industrial wastes such as fly ash, cement, sand/stone dust. Fly ash bricks are nowadays used in worldwide with gaining its popularity over clay bricks. The various advantages and disadvantages of fly ash bricks are as below:

Advantages of Fly Ash Bricks: 

1. Appearance:

The appearance of fly ash bricks is very attractive due to its pleasing color like cement, uniform size, and smooth finish. Due to uniform size, mortar required for walls and plastering reduces almost by 40-50%. Plaster of paris(Gypsum plaster), putty can be applied directly without a baking coat of plaster. These bricks are free from cracks, wrap age, organic matter, pebbles and nodules of free lime.

2. Strength: 

The compressive strength of fly ash blocks is very high (9-10 N/mm2). Due to high strength no breakages/wastages during transport and handling. The lower thickness of joints and plaster reduces cracking in plaster. These bricks do not cause any extra load for the design of structures and provide better earthquake resistance. It improves the strength over time and offers greater strength to the building.

3. Thermal Properties:

The thermal conductivity of fly ash bricks is 0.90 – 1.05 W/m2. They absorb less heat. The pozzolanic reaction between fly ash and lime produces less heat. It keeps your building cooler in summer, hence most suitable for Indian climates.

4. Durability:

Fly ash bricks are highly durable and less permeable. The lower permeability can efficiently reduce the effect of efflorescence on bricks. These bricks are less porous, absorb less water and reduce dampness on the walls. It is also highly resistant to attack by mild acid, water, and sulfate.

5. Sound Insulation:

Construction with fly ash lime gypsum bricks provides decent sound insulation to the building.

6. Sustainability:

Fly ash bricks are environmentally friendly as they are made of waste materials that come from combustion of coal in thermal power plants. There is no pollution or environmental damage, considered as a white category product.

7. Build ability:

Fly ash bricks have easy workability and absorb less water. They do not require soaking in water for 24 hours. The sprinkling of water before use is enough. The construction technique is same as clay brick construction and does not require any extra training for the masons.

9. Availability:

These bricks are generally available closer to the thermal power plants. However, finding dealers in all major cities and towns wouldn’t be a problem.

“Supertech Creations”, is a well known fly ash bricks manufacturer and supplier in Indore which are made from finest quality. “Supertech Creations.” have made several impressive growth & success records in the market due to their commendable product-line, sound facilities and hard efforts of professionals.

If you want to choose good material fly ash bricks then contact to our professionals by visit our website here: http://flyashbricksindore.com/


Labels:
Location: Pragati Vihar, Indore, Madhya Pradesh 452016, India

Comments

Post a Comment

Popular posts from this blog

Fly Ash Bricks vs AAC Blocks – Features, Preparation, and differences

  Fly Ash Bricks Fly Ash Bricks are an artifact, specifically masonry units, containing class C or class F ash and water. Compressed at 28 MPa and cured for twenty-four hours during a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for quite 100 freeze-thaw cycles. In other words, ash bricks are masonry units that are utilized in the development of buildings. AAC Blocks Autoclaved Aerated Concrete may be a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced during a wide selection of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are 3 times lighter. Preparation Preparation of Ash Bricks The mixing ratio is usually 40–50% ash, 50–40% sand 10% lime and 4% water. Ash reacts with lime within the presence of moisture to make calcium silicate hydrate which is that the binder material. The raw mixture goes into the molding press / machine; the bricks a...
Post a Comment
Read more

Which One is Better - For Building or Home, Fly Ash Blocks or Red Bricks?

About Supertech Creations  Established in 2013, Supertech Creations has made a name for itself in the list of top suppliers of Fly ash Bricks Indore . The supplier in Indore, Madhya Pradesh and is one of the leading sellers of listed products. Which one is a better - fly ash block or red bricks? Fly Ash Bricks or AAC Blocks are being used increasingly as a replacement of traditional Red Bricks. AAC Block is made from Fly Ash which is a residue of Thermal Power Plant. Introduction of Fly Ash bricks Fly ash bricks are as the name suggests are manufactured by using fly ash which is a by-product of the thermal power plant. The problem of fly ash disposal can be easily solved by manufacturing such products. In other words, Fly ash bricks are masonry units that are used in the construction of buildings. They are considered to be a part of good and affordable building materials. They contain Class C fly ash and water. They are also called fly ash lime bri...
Post a Comment
Read more

Fly Ash Bricks Manufacturing, Advantages & Disadvantages | Supertech Creations

  Fly Ash Bricks are made up of ash, lime, gypsum, and sand. These are often used extensively altogether building construction activities almost like common burnt clay bricks. Ash bricks are comparatively lighter in weight and stronger than normal clay brick, and eliminate the necessity for plaster; it can reduce high construction costs and erosion. Manufacturing Process: Fly ash (70%) Lime (10%) Gypsum (5%) and sand (15%) are manually feed into a pan mixer where water is added to the required proportion for homogeneous mixing. The proportion of raw material may vary depending upon quality of raw materials. After mixing, the mixture are allowed to belt conveyor through feed in to automatic brick making machine were the bricks are pressed automatically. Than the bricks are placed on wooden pallets and kept as it is for two days thereafter transported to open area where they are water cured for 10 -15 days. The bricks are sorted and tested before dispatch. Advantages...
Post a Comment
Read more