Fly Ash Bricks Manufacturing & It’s Uses

Fly Ash Bricks Manufacturing & It’s Uses – Supertech Creation

Fly Ash Bricks is a building material, specifically masonry units, containing class C or class F fly ash and water. Compressed at 28 MPa and cured for 24 hours in a 66 °C steam bath, then toughened with an air entrainment agent. The bricks last for more than 100 freeze-thaw cycles.

In other word it is a masonry unit that is used in the construction of buildings. They are considered to be a part of good and affordable building materials.

How Fly Ash Bricks Made?

Fly ash Bricks are made by using 3 different Fly Ash Bricks mixing formulas ratio of different materials.
According to the availability of raw materials and also market requirement you can select the best suitable mixing ratio.
As we all know that the main aim of a business is to make profit.
So, choose the best profitable fly ash bricks mixing formulas ratio for manufacturing of fly ash brick at very low cost.
At the same time also maintain the quality of the brick.
Our company able to provide consultancy services for making high strength Fly Ash Bricks.

Mixing Ratio for Fly Ash Bricks:

Fly ash (57-65%).
River Sand or stone dust (18-27%).
Hydrated Lime (9-12%).
Gypsum (5%).

Fly Ash Bricks used for the Construction of Various Types of Buildings Such As:

Factories
Warehouses
Power plants
Homes
High rise structures

“Supertech Creations”, is a well known manufacturer and supplier of Fly Ash Bricks which are made from finest quality. They have made several impressive growth & success records in the market due to their commendable product-line, sound facilities and hard efforts of professionals.

If you want to know more about Fly Ash Bricks or want to buy online, you can visit our website here http://flyashbricksindore.com/

Comments

Fly Ash Bricks vs AAC Blocks – Features, Preparation, and differences

Fly Ash Bricks Fly Ash Bricks are an artifact, specifically masonry units, containing class C or class F ash and water. Compressed at 28 MPa and cured for twenty-four hours during a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for quite 100 freeze-thaw cycles. In other words, ash bricks are masonry units that are utilized in the development of buildings. AAC Blocks Autoclaved Aerated Concrete may be a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced during a wide selection of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are 3 times lighter. Preparation Preparation of Ash Bricks The mixing ratio is usually 40–50% ash, 50–40% sand 10% lime and 4% water. Ash reacts with lime within the presence of moisture to make calcium silicate hydrate which is that the binder material. The raw mixture goes into the molding press / machine; the bricks a...

Fly Ash Bricks Manufacturing, Advantages & Disadvantages | Supertech Creations

Fly Ash Bricks are made up of ash, lime, gypsum, and sand. These are often used extensively altogether building construction activities almost like common burnt clay bricks. Ash bricks are comparatively lighter in weight and stronger than normal clay brick, and eliminate the necessity for plaster; it can reduce high construction costs and erosion. Manufacturing Process: Fly ash (70%) Lime (10%) Gypsum (5%) and sand (15%) are manually feed into a pan mixer where water is added to the required proportion for homogeneous mixing. The proportion of raw material may vary depending upon quality of raw materials. After mixing, the mixture are allowed to belt conveyor through feed in to automatic brick making machine were the bricks are pressed automatically. Than the bricks are placed on wooden pallets and kept as it is for two days thereafter transported to open area where they are water cured for 10 -15 days. The bricks are sorted and tested before dispatch. Advantages...

Best Quality Reflective Paver Block Manufacturer & Supplier in Indore

Reflective Pavers Blocks: Reflective Pavers Block are usually made from cement or concrete, and simulate the effects of cobblestone paths. Interlocking paver’s blocks join together through the use of sand and can cover any courtyard, decking, driveway, or walkway. Paver block, also known as a square paving block, is a commonly used decorative method. There are many different patterns of paver blocks that can be obtained using block paving. It is the strongest of the block paving bonds, making it a good choice for drive and road surfacing. The Primery Machines required for the Manufacturing Process of the Reflective Paver Blocks are: Two Vibrating Tables One Pan Concrete Mixture Machine One Pan Type Mixture Machine (Top mix) Air Compressor (for spray coating) 300kg Electronic Weight Scale Basic Material for Handling Equipments PVC Rubber Paver Block Moulds or Plastic Paver Block Moulds, it depends upon the Buyer Raw Materials Required for the Making of Reflective Paver Blocks Ag...

Supertech Creations – Top Fly Ash Bricks Supplier in Indore

Search This Blog