Skip to main content

Fly Ash Brick Vs Normal Red Brick by Supertech Creations









About Supertech Creations 
Established in 2013, Supertech Creations has made a name for itself in the list of top suppliers of Bricks in Indore. The supplier in Indore, Madhya Pradesh and is one of the leading sellers of listed products.

Is fly Ash bricks is better than normal red bricks?
Supertech Creations going to describe how Fly Ash bricks are better than normal red bricks.
First of all, short descriptions about Fly Ash bricks and red bricks.

Fly Ash bricks-
Fly ash bricks are a building material, specifically masonry units, containing class C or class F fly ash and water. Compressed at 28 MPa and cured for 24 hours in a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for more than 100 freeze-thaw cycles. In other words, Fly ash bricks are masonry units that are used in the construction of buildings. They are considered to be a part of good and affordable building materials. They contain Class C fly ash and water.


Red bricks-
The color of bricks depends on the chemical and mineral content of the clay and the temperature it is fired at. Iron gives bricks their red color while yellow bricks have a lot of lime in them. Cooler temperatures produce red bricks, hotter temperatures progress through browns to grays. Red bricks use the following raw materials: Lime Clay or Alumina, Sand, Iron Oxide, Magnesia. The sand used for red brick manufacture is mostly obtained locally.



Which is better - a fly ash brick or a normal red brick?

·   Uniform in shape and smooth in finish as the manufacturing is carried out using machinery.
·       Fly ash bricks are lighter as the main composition is fly ash.
·       Fly ash bricks are less porous.
·       The cost of fly ash brick is approximate 30% lower than clay brick.
·      Fly ash bricks are made from raw materials which come from combustion of coal in thermal power plants.
·       Red bricks are uneven in shape as mostly clay bricks are made manually.
·       Red bricks are heavier as compared to fly ash bricks.
·       Red bricks are more porous.
·       The cost of Red brick is higher than fly ash brick.
·       Red bricks are made from clay which is collected from fertile land or the top soil.

In all aspects fly ash bricks are better than red bricks. They are environmental friendly because maximum constituent is ash and fly ash brick has greater strength as compared to red bricks

“Supertech Creations” has made several impressive growth & success records in the market due to their commendable product-line, sound facilities and hard efforts of professionals.
.
For more information you may visit our website here – www.flyashbricksindore.com


Labels:
Location: Bicholi Mardana, Indore, Madhya Pradesh 452016, India

Comments

Post a Comment

Popular posts from this blog

Fly Ash Bricks vs AAC Blocks – Features, Preparation, and differences

  Fly Ash Bricks Fly Ash Bricks are an artifact, specifically masonry units, containing class C or class F ash and water. Compressed at 28 MPa and cured for twenty-four hours during a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for quite 100 freeze-thaw cycles. In other words, ash bricks are masonry units that are utilized in the development of buildings. AAC Blocks Autoclaved Aerated Concrete may be a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced during a wide selection of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are 3 times lighter. Preparation Preparation of Ash Bricks The mixing ratio is usually 40–50% ash, 50–40% sand 10% lime and 4% water. Ash reacts with lime within the presence of moisture to make calcium silicate hydrate which is that the binder material. The raw mixture goes into the molding press / machine; the bricks a...
Post a Comment
Read more

Fly Ash Bricks Manufacturing, Advantages & Disadvantages | Supertech Creations

  Fly Ash Bricks are made up of ash, lime, gypsum, and sand. These are often used extensively altogether building construction activities almost like common burnt clay bricks. Ash bricks are comparatively lighter in weight and stronger than normal clay brick, and eliminate the necessity for plaster; it can reduce high construction costs and erosion. Manufacturing Process: Fly ash (70%) Lime (10%) Gypsum (5%) and sand (15%) are manually feed into a pan mixer where water is added to the required proportion for homogeneous mixing. The proportion of raw material may vary depending upon quality of raw materials. After mixing, the mixture are allowed to belt conveyor through feed in to automatic brick making machine were the bricks are pressed automatically. Than the bricks are placed on wooden pallets and kept as it is for two days thereafter transported to open area where they are water cured for 10 -15 days. The bricks are sorted and tested before dispatch. Advantages...
Post a Comment
Read more

Best Blocks & Bricks Manufacturer in India – Supertech Creation

  Bricks & Blocks Bricks are small Rectangular Blocks which will be created to form parts of buildings, typically walls. The utilization of bricks dates back to before 7,000 BC when the earliest bricks were formed from hand-molded mud and dried within the sun. During the economic Revolution, mass-produced bricks became a standard alternative to stone, which might be costlier, less predictable and harder to handle. Block or Paving Blocks is one among the favored flexible surface treatment options for outdoor pavement applications. These blocks are looks beautiful, the block are often utilized in any season. Advantages of Bricks and blocks Strong Fire resistant Insect proof material Low maintenance Reliable Lightweight Water-resistant Frost resistant Combines thermal and acoustic properties Are Bricks and Blocks fireproof? Blocks have a build-in property of resistance to fireside, so it doesn't require any additional fire protection to fireside where...
Post a Comment
Read more