Skip to main content

Fly Ash Bricks Utilization Neptune - Supertech Creations

 

FLY ASH – WASTE TO WEALTH

  • It Maybe the most important contributor to sustainable development
  • Reduced use of river sand will prevent environmental disasters.
  • Can save up to 30% of cooling/heating load
  • Can save 30000 MW of power generation in the next decade
  • Can save next million tons of carbon emissions
  • A decade in its lifetime usage
  • One of the most important energies and resource-efficient levers

BULK USE OF FLY ASH

1. Conventional Use of Ash in

  1. Fly Ash Bricks
  2. Classified Ash
  3. Concrete blocks & Pavers
  4. AAC Blocks

2. High-End Products like

  1. Chemosphere
  2. Aluminium Classification from
  3. Ash
  4. Micro Silica
  5. Ultra fine Ash

3. New Products / Emerging Technology

  1. Light Weight Aggregate
  2. Engineered Stone
  3. Green Cement
  4. Briquettes

FLY ASH BASED DRY MIX PLANT

1. Dry Mix Mortar

  1. Rendering Material
  2. Special Cement-Self Levelling Cement
  3. Water Proofing Cement
  4. Ultra-Thin Top Layer – Cement for Road

SOFT / HARD BRIQUETTING EXTRUSION

1. SOFT FLY ASH BRIQUETTES

  1. Contains only Ash and Water
    1. Reduces the Air Pollution
    1. Cost-Effective Transportation
    1. Used for Mine Fillings

2. Hard - Fly Ash Briquettes

  1. Contains Fly Ash
  2. -80
  3. -90%
  4. Binders -8-10%
  5. Reduces the Air Pollution
  6. Use for Land filling

Supertech Creations is the fastest growing Fly Ash Bricks Manufacturing Company and always plays an important role in bringing latest technology globally with a cost-effective proposal always acting as frontline and innovative project partner for them.

If you want to know about Supertech Creation you can visit our website

Website: www.flyashbricksindore.com

Email: Supertechcreations@gmail.com

Mob: 971 331 0000

Labels:
Location: Pragati Vihar, Indore, Madhya Pradesh 452016, India

Comments

Post a Comment

Popular posts from this blog

Fly Ash Bricks vs AAC Blocks – Features, Preparation, and differences

  Fly Ash Bricks Fly Ash Bricks are an artifact, specifically masonry units, containing class C or class F ash and water. Compressed at 28 MPa and cured for twenty-four hours during a 66 °C steam bath, then toughened with an air-entrainment agent, the bricks last for quite 100 freeze-thaw cycles. In other words, ash bricks are masonry units that are utilized in the development of buildings. AAC Blocks Autoclaved Aerated Concrete may be a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced during a wide selection of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are 3 times lighter. Preparation Preparation of Ash Bricks The mixing ratio is usually 40–50% ash, 50–40% sand 10% lime and 4% water. Ash reacts with lime within the presence of moisture to make calcium silicate hydrate which is that the binder material. The raw mixture goes into the molding press / machine; the bricks a...
Post a Comment
Read more

Fly Ash Bricks Manufacturing, Advantages & Disadvantages | Supertech Creations

  Fly Ash Bricks are made up of ash, lime, gypsum, and sand. These are often used extensively altogether building construction activities almost like common burnt clay bricks. Ash bricks are comparatively lighter in weight and stronger than normal clay brick, and eliminate the necessity for plaster; it can reduce high construction costs and erosion. Manufacturing Process: Fly ash (70%) Lime (10%) Gypsum (5%) and sand (15%) are manually feed into a pan mixer where water is added to the required proportion for homogeneous mixing. The proportion of raw material may vary depending upon quality of raw materials. After mixing, the mixture are allowed to belt conveyor through feed in to automatic brick making machine were the bricks are pressed automatically. Than the bricks are placed on wooden pallets and kept as it is for two days thereafter transported to open area where they are water cured for 10 -15 days. The bricks are sorted and tested before dispatch. Advantages...
Post a Comment
Read more

Fly Ash Bricks – Fly Ash Cement Brick Manufacturer in Indore

  Fly Ash Bricks are made up of a mix of coal ash, fine sand, cement and water; hence it's also called ' Cement-Brick '. These bricks are high-tech; superior quality bricks that are to construct brick wall structures. 55% fly-ash, 35% sand and 10% cement are wont to make this brick. Raw materials used for the manufacture of ash Bricks: Fly ash – which is that the primary ingredient Sand or Stone dust – as fine aggregate Gypsum – to reinforce the fineness of the form of the bricks Cement – to extend bonding and strength General Characteristics of ash Bricks: The standard size of the brick is 230x110x70 The bricks are manufactured and tested as per IS 12894-2002 Are free from visible cracks, warpage, flaws, and organic matter. Compressive strength: 7.5N/mm2 on a mean Advantages of ash Bricks: They have high strength which is their primary benefit to be used for construction. Due to lesser water absorption, there's no dampness in walls. Gypsum ...
Post a Comment
Read more